Ace Pumps 1" Suction x 3/4" Hydraulic Driven Pump; FMC-75-HYD-204 (49775)

Ace Pumps 1" Suction x 3/4" Hydraulic Driven Pump; FMC-75-HYD-204 (49775)

 Ace Pumps 1" Suction x 3/4" Hydraulic Driven Pump; FMC-75-HYD-204 (49775)

• Designed for starter fertilizer and small sprayer applications
• Replace 12V diaphragm pumps and roller pumps
• Tall Blade Impeller design - higher pressure at standard engine speeds
• All Polypropylene corrosion resistant construction
• The 204R motor requires 4 GPM (15.1 LPM) maximum hydraulic fluid input
• Integral Needle Valve bypasses up to 9 GPM (34 LPM) on Open Center Systems
• Standard Viton Carbon/Ceramic or Optional Severe Duty Silicon Carbide Mechanical Seal
• Polypropylene Corrosion Resistant Construction
• Stainless Steel Shaft and Hardware

Recommended for:
Pressure Compensating Closed Center Systems
Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve

Details
Poly centrifugal driven by a 4 GPM hydraulic motor with integral needle valve
Max Flow: 25 GPM
Max Pressure: 100 PSI
Maximum Fluid Temp: 140°F
Suction: 1"
Discharge: 3/4"
Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period
Do Not Run With Flow Shutoff for Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications

Ace Pumps Part Number:
49775 - Ace Pumps 1" Suction x 3/4" Hydraulic Driven Pump; FMC-75-HYD-204 (49775)