Remco SmoothFlow 2.0 GPM, 12V 120 PSI Demand Pump - 3923-9J2-82B

Remco SmoothFlow 2.0 GPM, 12V 120 PSI Demand Pump (3923-9J2-82B)

Remco SmoothFlow 2.0 GPM, 12V 120 PSI Demand Pump (3923-9J2-82B) Viton

Remco SmoothFlo™ Pumps have redefined the performance of diaphragm pumps. With the exclusive FLO-IQ Inside™, Remco SmoothFlo pumps eliminate rapid switch cycling completely. The Remco 3900 SmoothFlo Pump delivers consistent high pressure while the FLO-IQ™ Technology provides a seamless and variable flow rate up to 2 GPM — ON DEMAND! Matched with a sealed motor, heavier wire & low amp draw, the SmoothFlo is designed to take on any task from constant flow at high pressure to the abusive environment of on and off spot spraying in the field.

Typical Applications

RV and Coach water pumps
Ag water pumps
Transfer pumps

Pump
Type Diaphragm
Mode Demand and Bypass
Liquid Temperature 140°F (60°C) Max.
Priming Capabilities 8 ft.
Power 9 amps max current draw
Max Pressure 60 PSI (8.25 bar)
Inlet/Outlet Ports 3/8” NPT
Weight 6 lbs (2.7 kg)
Motor
Leads 2-pin mold connector
Temperature Limits 140°F (60°C)

Motor

Type 12v permanent magnet, totally enclosed, non-ventilated
Leads 14 AWG, 12˝ long
Temperature Limits Motor is not equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 180°F (82°C)

Materials of Construction

Pump Housing Polypropylene Nylon
Valves Viton
Diaphragm Santoprene
Fasteners Stainless steel
Motor Shell Coated Steel

Product Highlights

• Made in USA
• Available motors from 12VDC to 115VAC, Standard terminations are 12", stripped end AWG leadwires, with connectors and power cords also available.
• Sealed motor
• Professional grade
• Heavier wire for low amp draw

Remco Part Number:
3923-9J2-82B - Remco SmoothFlow 2.0 GPM, 12V 120 PSI Demand Pump (3923-9J2-82B)