United Central Industrial Supply L85 Ag Spray Hose
This L85 Ag Spray hose is designed for a range of liquid spray units, from hand-held units to large floater spray units for handling liquid fertilizer solutions. The tube is constructed with high grade EPDM, and the hose is offered in 1/4", 3/8”, 1/2", 5/8”, 3/4", 1”, 1 1/4", 1 1/2", and 2” sizes.
Recommended clamps for this hose:
For the 1/4" hose use clamp M62602
For the 3/8" hose use clamp M62606
For the 1/2" hose use clamp M67107
For the 5/8" hose use clamp M67167
For the 1" hose use clamp TC120
For the 1 1/4" hose use clamp TC150
For the 1 1/2" hose use clamp TC181
For the 2" hose use clamp TC218
L85 Ag Spray Hose is available in 3/8", 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", and 2" sizes.
- Applications: For liquid spray units, from hand-held units to large floater spray units handling liquid fertilizer solutions
- Tube: High grade EPDM
- Reinforcement: Multiple high tensile textile spiral
- Cover: Red or black chemical, weather, & ozone resistant EPDM
- Recommended Fittings: Banded on King nipples or short shank couplings
- Temperature Range: -40°F to 180°F
- Branding: United Central Industrial Supply L85 AG Spray xxx PSI Max WP
- Advantages:
- High-grade EPDM tube and cover
- General applications under moderate operating conditions
- Low pressure water-spraysmarter agricultural sprays
- Smooth cover
- Light weight
Part #'s
L85-025 = 1/4"
L85-038 = 3/8"
L85-050 = 1/2"
L85-058 = 5/8"
L85-075 = 3/4"
L85-100 = 1"
L85-125 = 1 1/4"
L85-150 = 1 1/2"
L85-200 = 2"
Hoses are measured by inside diameter, unlike tubes which are measured by outside diameter. As a matter of fact, that is how the hoses and tubes are differentiated. Dash numbers, the industry standard, are typically used to describe hose and coupling size.
