Fimco 4.5 GPM High-Flo Standard Demand Pump
$175.73
16 In Stock!
SKU
5151088
FIMCO Industries 4.5 GPM standard demand pump runs only when needed, is self-priming and has ball bearings to ensure a longer FIMCO pump life.
Fimco 4.5 GPM High-Flo Standard Demand Pump
Fimco's 4.5 GPM High-flo standard demand pump does not run continously, the pump and motor will only operate when flow is required. Both pump and motor stop instantly when discharge is closed. By utilizing the diaphragm design, it will eliminate the troublesome shaft seals. This pump can be run dry without damage. Ball bearing drive assures longer pump life. This pump also has excellent self-priming capability as well as using a ball bearing drive to ensure a longer pump life.
- 12 Volt Diaphragm Pump
- 4.5 GPM
- 45 PSI Max pressure
- 11 amp draw
- Santoprene diaphragms
- Viton valves
- Each pump has an internal fan which cools the pump during operation by up to 50%
- Upgraded pressure switch for longer life
- Max temperature of liquid - 130° F (55° C)
- Motor windings have been increased to help disipate heat
- RoundUp® compatible
Fimco Part #:
5151088 = Fimco 4.5 GPM High-Flo Standard Demand Pump
| Drive | 12 VDC |
|---|---|
| Inlet | 3/8" |
| Outlet | 3/8" |
| Pump Models | Diaphragm |
Write Your Own Review
Related Products
Check items to add to the cart or
