ADVICE | VIDEOS | TIPS & TRICKS | SPRAYING FAQs | ABOUT | 877-475-9939

Welcome.

Totally Tubular John Deere Starter Fertilizer Placement Tube 1700,7200,7300 (TT-002)


Additional Images
Product Videos
Totally Tubular John Deere Starter Fertilizer Placement Tube 1700,7200,7300 (TT-002)
$59.95

List Price: $72.22

Your savings: $12.27 (17%)

Availability: In Stock

This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. This provides a 1/4" inside opening that will accept a 1/4" fertilizer line inside or 3/8" hose outside with a hose clamp for a leak free connection. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet.
TT-002
OR
Description

Details

John Deere Starter Fertilizer Placement Tube 1700,7200,7300 (TT-002)

John Deere Starter Fertilizer Placement Tube Part #TT-002

This simple yet effective design is totally protected by the disc blades, so rocks should not be an issue. This provides a 1/4" inside opening that will accept a 1/4" fertilizer line inside or 3/8" hose outside with a hose clamp for a leak free connection. The optional seed bounce flap closes the opening between the disc openers assuring correct seed placement by eliminating seed bounce and ricochet.

Key Benefits
Starter Fertilizer application deeper in the soil profile
Instant root uptake for early plant health
Maintenance free

Installation Instructions:
Remove depth gauge wheels and disc's, taking note of shim placement
Remove factory seed tube guard
Drill a 5/8" hole in the top of the shank of the row unit as shown. This hole is centered on the row unit, left to right, and 1" to the center of the hole from the front of the shank.
Slide TT-002 up into position and feed the top of the tube through the hole that was just drilled. The tube fits through the triagular shaped hole in the front of the row unit; not all row units are made the same so you may have to take a punch and drive into this opening to make it slightly larger; then up through the hole you just drilled.
Align roll pin holes and install new roll pins (supplied). Important: Do not force the holes to line up. Due to slight differences in the planters, the top bend on the tube may have to be adjusted slightly to allow the roll pins to line up without force
Re-Install seed tube
Re-Install disc openers taking care to get the correct shim placement
Re-Install depth gauge wheels

The TT-002 is made from a thicker stainless steel tubing than the rest of our tubes. This allows the 1/4" line to fit inside this tube, however the John Guest fitting will NOT fit on the outside of this tube.
Recommend replacing disc openers when you put our fertilizer tubes on. 



Totally Tubular Part Number:
TT-002 - John Deere Starter Fertilizer Placement Tube 1700,7200,7300 (TT-002)

Additional Information

Additional Information

Manufacturer Totally Tubular
Accuracy No
Flow Type No
0- Max Pressure (PSI) No
Number of Channels No
Range No
Reviews