Hypro 3D Inclined All-Purpose Spray Nozzle
Hypro 3D Inclined All-Purpose Nozzle
The Hypro Inclined All-Purpose Nozzle is an engineered inclined spray nozzle desinged to provide the best coverage on hard to hit targets. Install facing alternating directions along the boom to provide coverage on both sides of the target. Designed to ensure even spray distribution on both sides fo the boom when the nozzles are installed in alternating directions.
Features and Benifits
- Designed in partnership with Syngenta using wind tunnel research and more than 10 years of agronomic field trials.
- Proved to deliver up to al 10% increase in pre-emerge weed control compared to a conventiona flat fan nozzle.
- Creates the optimum droplet size for coverage, fewer droplets bounce off or drift away.
- 60-75% drift reduction compared to flat fan nozzles.
- Inclined spray is designed to be installed alternating forward and backward on the boom to provide 3-deminsional coverage on vertical targets such as grass weeds, dirt clods, and broad leaved canopies.
- PWM compatible; install 3D nozzles facing the same direction when using with a PWM system at less than 30Hz
- FastCap version utilizes the SnapLock cap technology reducing installation torque by 73%
Hypro Part Number:
FC-3D100-02 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-03 = 3D Inclined All-Purpose Spay Nozzle
FC-3D100-04 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-05 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-06 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-08 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-015 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-025 = 3D Inclined All-Purpose Spray Nozzle
FC-3D100-035 = 3D Inclined All-Purpose Spray Nozzle
